PPHA Forums

Predator Hunting => Guns and Ammo => Topic started by: a bolt on March 15, 2012, 08:04:55 PM

Title: reloading for 204.
Post by: a bolt on March 15, 2012, 08:04:55 PM
Does anyone have any  recipes that work well for cz 527 204 ?
Title: Re: reloading for 204.
Post by: Lookn4Fur on March 16, 2012, 08:07:04 AM
Just one, give me the gun!
Title: Re: reloading for 204.
Post by: zekedogg on March 16, 2012, 09:57:01 AM
Just one, give me the gun!

Won't help you. You'll just mess with the trigger and miss.
Title: Re: reloading for 204.
Post by: Lookn4Fur on March 16, 2012, 04:15:16 PM
Funny!  ABolt is the one who adjusted my trigger.
Title: Re: reloading for 204.
Post by: a bolt on March 16, 2012, 06:00:03 PM
Whats going on,that was suposed to make it easier to hit maybe u should give me ur gun.
Title: Re: reloading for 204.
Post by: Buckwheat on March 16, 2012, 07:51:06 PM
Abolt It,s not the trigger. :)
Title: Re: reloading for 204.
Post by: Lookn4Fur on March 18, 2012, 09:15:28 AM
I'll give you my gun when Ernie gives me his gun.  Heck maybe you guys are on to something here.  Lets all swap guns for the season!

Wish I had a recipe for you but I don't reload.  No sense reloading when you can't hit nothing.
Title: Re: reloading for 204.
Post by: Buckwheat on March 18, 2012, 11:30:57 AM
Not!
 :)
Title: Re: reloading for 204.
Post by: morrisblueivy on March 23, 2012, 06:48:46 PM
im reloading for tc g-7. i useBL-C(2) powder 29 grns. with cci 400 primer and 40 grn. v-max.
Title: Re: reloading for 204.
Post by: a bolt on March 24, 2012, 05:52:49 PM
Thank you.
Title: Re: reloading for 204.
Post by: war_nrg on April 12, 2012, 11:17:09 AM
Greetings,
I reload for a savage 204. varmit grenades and varget, BR primers.  Good hunting load not the best papercutter 1 inch 5 shot.  Good load for yots, min. fur damage and g-hogs I have not used it on fox.
Cheers
Title: Re: reloading for 204.
Post by: bangflop on April 30, 2012, 10:07:00 PM
The cz's seem to like the 39grain sierra over reloader 10x. I would suggest shooting an Audette ladder and determine what charge your rifle likes. Once you have charge weight then play with seating depth....but remember the magazine will only accept OAL of about 2.350 at the max. If you want to shoot single shot then Jim Calhoon in Havre, MT makes a real nice follower to replace the clip magazine. Use a thick cupped primer like remington's 7 1/2. My CZ Varmint target likes 25.1 grains of Reloader 10x with winchester brass federal 205M primers with the 39 grain Sierra. Sill playing with seating depth but seems good at 2.300 OAL and may get better closer to the lands...that is next at the range. With that 39 sierra the max OAL in my rifle would be 2.420 but that is not measured to the ogive and the plastic tips vary in length. Half inch 5 shot groups routinely with a 3 shot ragged hole measuring .160 possible ....love the rifle!